Whenever you’re tasked with a project that requires the use of a Makita drill, it’s important to take special caution. Working with a high-powered piece of machinery can be dangerous if not handled properly. To ensure accuracy and safety when using your Makita drill, here are five tips to help get the job done right:
1. Read and understand the operating manual for your specific model of Makita drill – Knowing how your drill works is essential for safe and accurate operation. Make sure to read through the instruction manual so you know how to properly adjust all settings, such as speed, torque control, and action mode.
2. Set up a safe workspace – Clear away any clutter or obstacles that could interfere with your drilling project, and make sure you have enough room to maneuver around easily.
3. Wear protective gear – Protective eyewear, gloves, and hearing protection should always be utilized when using any power tools in order to keep yourself safe from injury and debris flying about during operation.
4. Select the correct bit for your task – Picking out the right bit for each particular task will greatly improve accuracy and create better results on your projects. Consider materials like wood or concrete that need special attention when selecting bits as well as dual-use bits that can be used for multiple tasks such as driving screws or drilling holes .
5. Maintain control over speed settings – Paying close attention to recommended speed settings is crucial in getting accurate results while working with a power tool like a Makita drill; too much speed can easily cause damage or ruin results while not enough speed may lead to ineffective performance. Keep an eye on the variable speed setting controls on the machine itself so you can adjust according to your task at hand.
By following these five tips you’ll ensure optimal performance while staying safe while working with your Makita Drill!Check Out The Full Range Of Makita Products Here
Makita is a brand of power tools that offers a wide range of drills suitable for various applications and settings. Some of the features and settings that may be available on a Makita drill include:
If you need to change the drill torque control on your Makita cordless drill, it can be done easily in just a few steps.
First, locate the clutch adjustment knob on your drill and turn it either clockwise or counterclockwise to increase or decrease the desired level of torque.
Next, test out the new setting by driving a screw into wood – if you notice that the speed slows down when reaching pre-set levels, then the settings are correctly adjusted. If not, you will have to make further adjustments before continuing with your project.
Finally, fine tune the settings as necessary until you get the perfect result for your next DIY task.
By following these simple steps, changing drill torque control on your Makita cordless drill will be easy and hassle-free!
Drills often come with a variety of symbols and markings that represent different features or functions of the tool. Here are some common symbols that you may find on a drill and their meanings:
Power switch: This symbol looks like a simple on/off switch and indicates the power button or switch for turning the drill on and off.
Forward/reverse switch: This symbol looks like an arrow pointing in two directions and indicates the button or switch that controls the direction of the drill’s rotation. Pressing the button one way will make the drill rotate in a clockwise direction (forward), while pressing it the other way will make the drill rotate in a counterclockwise direction (reverse). This feature is useful for driving screws or for removing stuck drill bits.
Speed settings: This symbol looks like a dial with a range of numbers or marks around it and indicates the button or switch that controls the speed of the drill. Higher numbers typically represent a faster speed, while lower numbers represent a slower speed.
Clutch settings: This symbol looks like a series of concentric circles or a dial with a range of numbers or marks around it and indicates the button or switch that controls the torque (rotational force) applied by the drill. Higher numbers typically represent a higher torque, while lower numbers represent a lower torque. This feature is useful for avoiding overdriving screws or for applying a specific amount of force for tasks such as driving lag bolts.
Chuck size: This symbol looks like a letter and a number and indicates the size of the chuck, which determines the size of the drill bit that can be used. The letter represents the metric size (such as “M10” for 10 millimeters) and the number represents the imperial size (such as “3/8” for 3/8 inches).
Safety warnings: These symbols may include a triangle with an exclamation point, a circle with a slash through it, or other markings that indicate potential hazards or cautionary measures that should be taken when using the drill. It’s important to familiarize yourself with these symbols and follow the safety guidelines to avoid injury and damage to the tool.Continue reading
If you don’t have a bidet in your bathroom, you’re missing out on one of the most refreshing and cleansing experiences you can have. A bidet is basically a small sink that sits next to your toilet, and it’s used for cleaning your nether regions after using the restroom. Trust us, and once you try using a bidet converter kit, you’ll never go back to wiping with toilet paper again! Want to know more about how these amazing devices work? Keep reading…
A bidet converter kit is an innovative product that transforms any existing toilet into a full-functioning bidet. The kit typically consists of some combination of a cold and hot water supply line, adjustable spray nozzles, and a control panel to manually adjust the water temperature, pressure, and oscillation. Some even have a gentle glowing nightlight, such as the Brondell S1400-RW Swash.
Installing a bidet converter kit is an easy DIY task that can take less than half an hour to complete with basic plumbing tools. Most kits utilize hot and cold water supplies through a Tee connection which is then passed through the separate shut off valves before it connects to the included spray nozzle. From there, the control panel can be mounted on the side of the toilet seat for convenient access, where all features like oscillation, spray width, temperature, and the pressure can be adjusted accordingly.
The result is a fast, easy way to add full-functioning bidet capabilities that are just as effective as any installed unit in your bathroom. If you want superior hygiene ideal for people with skin sensitivities or mobility issues, then investing in one of these kits is definitely worth the effort and money.
Plus it provides an affordable solution for anyone looking to experience all the benefits of having a dedicated bidet in their home without having to purchase or install an expensive piece of equipment. Simply put, installing a bidet converter kit is one of the easiest ways to improve your washroom experience without breaking your budget. With just a few simple steps, you can enjoy true cleanliness at its finest – anytime you need it!
Spending money on the most essential items can help save time, energy, and money in the long run. When it comes to taking care of your personal hygiene needs, investing in a bidet converter kit is one of the best ways to ensure your comfort and satisfaction with your bathroom experience. The convenience of a bidet converter kit allows you to make any standard toilet into a bidet-style toilet without having to replace the entire assembly.
The conversion kit includes everything you need to install it over an existing toilet properly, as well as several components that allow you to enjoy all the benefits of a full-fledged bidet without adding or removing any parts or services.
Bidets not only keep you feeling cleaner, but they also provide better sanitation due to their ability to cleanse areas more effectively than traditional methods. With no overflow spillage risk, using a bidet also means saving on toilet paper and reducing risk from longstanding clogs. By investing in a bidet converter kit, you get one step closer to discovering why so many are opting for this additional convenience for their personal hygiene needs.
Furthering its usefulness, turning your current toilet into a luxurious fixture will keep guests comfortable and impressed during their visit as well. With such practicality and style available at your fingertips through the installation of a single device, it’s easy to understand why everyone should have at least one bidet converter kit in their home!
If you are looking for an easy and cost-effective way to add a bidet to your existing toilet, consider investing in a quality bidet converter kit. These kits provide detailed instructions that make it simple to install a bidet without the need for additional plumbing work.
Bidet converters are growing in popularity as more people look for ways to upgrade their existing toilets with the convenience of a bidet. Fortunately, installing a bidet is easier than it sounds. With the help of a bidet converter kit, the installation process can be broken down into five simple steps. First, secure the harness to the back of your toilet by attaching it to the two upper bolts on either side of your seat.
Next, connect the water supply hose to the housing unit and then fasten it securely to your wall or floor. After that, you’ll need to mount the temperature control valve near your toilet and connect it to both the incoming water supply and your feed tube.
Finally, attach the diverter valve – located between your tank and bowl – by turning each lever clockwise until tight. Now that everything’s connected turn on the water supply and make sure there are no leaks before checking out your brand new bidet! With just a few quick steps, you’ll be able to enjoy all of life’s little luxuries without ever having to step foot outside your bathroom.
Bidet converters have become popular in recent years due to their numerous benefits. Not only do bidet converters help save water by using less than a gallon per flush, but they are also hygienic and eco-friendly. The inner nozzle can be adjusted to many settings, allowing users to choose the perfect pressure to clean themselves without wasting excess water.
In addition, since no toilet paper is used with a bidet converter, there’s no need for as much septic tank maintenance over time. Compared to standalone bidets, bidet converters are affordable, simple to install, and don’t require any expensive remodeling efforts. Once installed on an existing toilet, the converter takes up less space than a traditional bidet and is more aesthetically pleasing as well.
All in all, anyone looking for an easy way to conserve water and improve bathroom hygiene at the same time should consider investing in a bidet converter today.
There are a variety of bidet converter kit brands to choose from. Some popular options include the Toto Washlet C200, Bio Bidet A7 Aura and Brondell Swash 1400. All of these models come with easy-to-follow installation instructions and high quality components that meet industry standards.
For example, Toto’s Washlet features a slim design, hands-free operation, and adjustable temperature control settings for added comfort.
The Bio Bidet A7 Aura has an oscillating spray pattern, wireless remote control, and air dryer function for maximum convenience.
With a useful LED nightlight, Brondell’s Swash 1400 offers a quick release button, nozzle sterilization feature, and multiple user presets so you can customize your experience every time you use it. With so many great options, you’re sure to find the ideal bidet converter kit for your needs.
Before purchasing a bidet converter kit, it’s important to read customer reviews and compare features and prices to make sure you get the best value for your money. Many of these kits come with extended warranties, so you can be sure that your investment will last for years to come.
Once you’ve chosen your preferred brand and model, use the installation instructions provided and follow the steps above carefully to ensure successful installation. With a little bit of time and effort, you’ll soon have a comfortable and efficient bidet experience in no time! Enjoy all the luxurious benefits of a high quality bidet today!Continue reading
To quickly answer does mig welding require gas, yes it does. The four most common shielding gases used in MIG welding are carbon dioxide, argon, oxygen, and helium.
So, yes, MIG welding generally requires gas in order to work properly. This gas helps to shield the weld area from oxygen and other atmospheric contaminants that can cause weld defects. Without gas, mig welding can be more difficult and may not produce as high quality of welds. But you can buy SIMDER MIG Welder Gas Gasless MIG Welding Machine 250Amp 110V 220v Dual Voltage Flux Core Welder, which means you don’t need gas.
mig welding is a specialized type of welding that uses a wire electrode to create an arc between the workpiece and the welding gun. The arc melts the wire, which in turn creates a pool of molten metal that fills the joint. mig welding is prized for its versatility, as it can be used on a variety of materials, including aluminum, stainless steel, and even cast iron.
In addition, mig welding is relatively easy to learn and can be performed by welders of all skill levels. Perhaps most importantly, mig welding is highly efficient and can be used to join large sections of metal quickly and easily. For these reasons, mig welding has become one of the most popular welding methods in recent years. keep your equipment in good working order, Argon/CO2 Regulator Kit for Mig Welder clean and ensure tanks are kept secure.
If you’re new to welding, setting up your mig welder can seem like a daunting task. But with a little bit of knowledge and the right tools, you can get your welder set up for success. Here’s what you need to do:
First, make sure you have the right gas and wire for your project. For most projects, argon gas and a .030″ diameter wire will work well. I buy 125 cu/ft 75% Argon 25% CO2 Welding Gas Cylinder Tank CGA 580 – tanks, as these have a 10 year life.
Next, set your welder to the correct power and voltage settings. For thin metals, you’ll want to use lower power settings, while thicker metals will require higher settings. Experiment until you find the sweet spot for your project.
Finally, practice making some test welds on some scrap metal before you start your actual project. This will help you get a feel for the welder and ensure that you’re getting the best results possible.
Welding is a process that uses heat to join pieces of metal together. In order to weld effectively, a filler material is needed to create a strong bond. Mig welding wire is one type of filler material that can be used for mig welding.
There are different types of mig welding wire available, each with its own benefits and drawbacks. For example, some mig welding wires are made from aluminum, which is lightweight and easy to work with. However, aluminum mig welding wire is not as durable as other types of mig welding wire, and it can be more difficult to control the weld bead.
As a result, it is important to select the right type of mig welding wire for the specific application. With so many options available, it is important to consult with an expert in order to choose the best mig welding wire for the job.
When joining two pieces of metal together, there are a few different welding methods that can be used depending on the type of metal. If both pieces are made of the same or a similar metal, then oxy-acetylene welding can be used. This involves heating the two pieces with a torch and then melting a filler metal into the joint.
For dissimilar metals, such as steel and aluminum, TIG welding is typically used. This involves using an electrode to create an arc between the two pieces of metal. The heat from the arc melts the metals, which can then be joined together.
Finally, MIG welding is another option that can be used for a variety of metals. With this method, a wire is fed through a nozzle and melted by an electric current. The molten wire then joins the two pieces of metal together. By understanding these different welding methods, it is possible to successfully join any two pieces of metal together.
Mig welding, or gas metal arc welding, is a popular type of welding that uses an electrode wire fed through a welding gun. The electrode melts and become part of the joint between two pieces of metal. Mig welding is commonly used for repairing automotive parts and for fabricating steel structures. While mig welding is relatively simple, there are a few common mistakes that can be made. Here are some tips for avoiding these mistakes:
-Keep the electrode tip clean. If the tip becomes clogged with slag, it can cause the arc to wander, making it difficult to control the weld bead.
-Do not touch the electrode to the workpiece. Not only will this cause the arc to lose its focus, but it can also damage the electrode.
-Do not hold the torch too close to the workpiece. This can cause the arc to overheat and damage the base metal.
-Keep a consistent speed when welding. This will help to create a smooth, even bead.
By following these tips, you can avoid common mig welding mistakes and create strong, durable welds.
“MIG,” is short for metal inert gas, so this indicates it is better to use this option for welding with gas.Continue reading
Building an outdoor fireplace doesn’t have to be expensive. With a little creativity and some elbow grease, you can build a beautiful outdoor fireplace for a fraction of the cost of a professional installation. Here are some tips to get you started:
1. Choose a location for your fireplace. It should be away from your house and any trees or other structures.
2. Sketch out a design for your fireplace. It can be as simple or elaborate as you like.
3. Gather the materials you’ll need. For a basic fireplace, you’ll need bricks, mortar, and a metal grate.
4. Start building! Lay the bricks in the mortar, following your design.
5. Once the fireplace is built, add the metal grate and any other finishing touches.
With a little effort, you can easily build an outdoor fireplace that will be the centerpiece of your backyard.
Assuming you would like tips on building an outdoor fireplace on a budget:
One option for building an outdoor fireplace is to use a kit. There are many companies that make outdoor fireplace kits that are easy to assemble and relatively inexpensive. Another option is to repurpose an old grill or metal barrel. If you are handy, you can also build a fireplace from scratch using bricks, cinder blocks, or stone.
When choosing materials, opt for those that are durable and weather-resistant. For the fireplace itself, bricks or cinder blocks are a good option. If you are using a metal barrel, make sure it is made of stainless steel or another type of metal that will not rust.
As far as the fuel, you can use wood, charcoal, or gas. If using wood, make sure it is properly seasoned so it burns well and doesn’t produce a lot of smoke.
Here are some general tips for building an outdoor fireplace on a budget:
-Start with a plan. Sketch out a rough idea of what you want your fireplace to look like. This will help you determine the materials you need and the steps involved in the build.
-Gather your materials. Once you have a plan, start collecting the materials you need. If you are repurposing an old grill or barrel, you may already have most of what you need. Otherwise, check out salvage yards, Craigslist, or Facebook Marketplace for cheap materials.
-Build a foundation. A solid foundation is key for any type of fireplace. For a repurposed grill or barrel, you can use cinder blocks, bricks, or stone. If building from scratch, use cinder blocks or bricks.
-Assemble your fireplace. If using a kit, follow the instructions that come with it. If repurposing a grill or barrel, place it on the foundation and secure it in place. If building from scratch, use bricks or cinder blocks to build the fireplace according to your plan.
-Install a flue. A flue is necessary for any fireplace to ensure proper ventilation. If you are using a kit, a flue should be included. If not, you can purchase one at a hardware store.
-Finish it off. Once the fireplace is assembled, you can add finishing touches like stone veneer or mortar.
Some tips for building an outdoor fireplace on a budget include:
-Using bricks or stones that you already have on hand
-Choosing a design that is simple and does not require special tools or materials
-Building the fireplace on a concrete patio or other level surface
-Using a metal insert or fire pit for the fireplace
-Building a chimney or screen to enclose the fireplace
-Making sure the fireplace is at least 10 feet away from any structures or combustible materials
When building an outdoor fireplace, there are a few ways to save money. One way is to use recycled materials. Another way is to build the fireplace yourself. You can also save money by buying a kit.
Assuming you would like tips on how to build an outdoor fireplace on a budget:
One cost-effective way to build an outdoor fireplace is to use bricks or stone that you may already have on hand. If you need to purchase bricks or stone, look for sales or clearance items at your local home improvement store. Another cost-effective way to build an outdoor fireplace is to use cinder blocks. Cinder blocks are typically very affordable and easy to work with. If you use cinder blocks, you can create a very modern looking outdoor fireplace.
Another tip for building an outdoor fireplace on a budget is to use recycled materials. For example, you could use an old metal drum or washing machine tub as the base of your fireplace. If you are using bricks or stone, you could look for used materials at a salvage yard.
Finally, consider building a simple wood frame for your outdoor fireplace. You can then cover the frame with brick, stone, or tile. This option is usually less expensive than building a fireplace from scratch.
One way to build an outdoor fireplace without breaking the bank is to use recycled materials. For example, you can use bricks from a demolished building or pavers from a sidewalk. If you have access to a wood stove, you can use the stove pipe as your chimney.
Another way to build an outdoor fireplace on a budget is to use a prefabricated fireplace kit. These kits usually come with everything you need to build the fireplace, including the firebox, chimney, and hearth. The kits are designed for easy assembly, so you can usually have the fireplace built in a day or two.
If you want to build a more permanent and luxurious outdoor fireplace, you can invest in a cast concrete fireplace. These fireplaces can be customized to match your home’s exterior and can last for decades with proper care. However, cast concrete fireplaces can be expensive, so be sure to get a quote from a contractor before starting this project.
If you’re looking to add an outdoor fireplace to your backyard on a budget, there are a few frugal tips you can follow to make it happen. First, consider using recycled materials where possible. This could mean scouring local classified ads and salvage yards for bricks or stone, or even repurposing an old metal barrel or drum. Secondly, take advantage of free or low-cost labor by enlisting friends and family to help with the construction. Finally, be mindful of the overall design and keep it simple to save on materials and costs. By following these tips, you can build an outdoor fireplace that will be both stylish and budget-friendly.
One option for building an outdoor fireplace on a budget is to repurpose an old metal barrel or drum. Clean out the inside of the barrel thoroughly and then cut a hole in the top for ventilation. Next, build a fire pit in the ground in front of the barrel using bricks or stones. Finally, place the barrel over the fire pit, making sure that the opening is facing the direction you want the heat and flames to go. You can use a metal grate to cover the opening if desired.
So now you know the answer to how to build an outdoor fireplace cheap and what is stopping you from doing this yourself?
If you’re looking to add a touch of elegance to your bathroom, painting your porcelain sink is a great way to do it. Instead of shelling out and spending hundreds on a new sink, why not just tart up the sink you already have? Unless there is a chip or crack in it, why bother buying new?
But before you get started, there are a few things you need to know.
For starters, you’ll need to use a special type of paint designed specifically for porcelain. This can be found at most hardware stores. You’ll also need to sand the sink down before painting, in order to create a smooth surface for the paint to adhere to.
Once you’ve sanded and cleaned the sink, you’re ready to start painting. Using a small brush, apply the paint evenly over the entire surface of the sink. Let it dry thoroughly before moving on to the next step.
Now it’s time to add the finishing touches. You can either paint the entire sink in one color, or you can create a design by painting different sections in different colors. If you go with the latter option, be sure to use painters tape to keep the colors from bleeding into each other.
Once you’re satisfied with the results, remove the painters tape and enjoy your new bathroom sink!Soto’s Appliance and Porcelain Paint Touch Up
You will need to use a special type of paint designed specifically for porcelain in order to get the best results. This type of paint can be found at most hardware stores. You should also sand the sink down before painting in order to create a smooth surface for the paint to adhere to. Soto’s Appliance and Porcelain Paint Touch Up is a really good product.
Epoxy or enamel paint are the best options for painting porcelain sinks. Enamel paint provides a nice, glossy finish that is easy to clean. Epoxy paint is more durable and can withstand more wear and tear. It is also more resistant to chipping and fading.
1. Start by sanding down the sink in order to create a smooth surface for the paint to adhere to.
2. Next, apply the paint evenly over the entire surface of the sink using a small brush.
3. Let the paint dry thoroughly before moving on to the next step.
4. Finally, add the finishing touches by painting different sections in different colors or painting the entire sink in one color. If you choose to paint different sections in different colors, be sure to use painters tape to keep the colors from bleeding into each other.
5. Once you are satisfied with the results, remove the painters tape and enjoy your new bathroom sink!Ekopel 2K Bathtub Refinishing Kit – Odorless DIY Sink and Tub Reglazing Kit
Yes, a porcelain kitchen sink can be refinished. However, it is important to note that this process will require special care in order to achieve the best results. In most cases, it is best to hire a professional to refinish your porcelain sink. Consider the Ekopel 2K Bathtub Refinishing Kit – Odorless DIY Sink and Tub Reglazing Kit as another popular option.
The best type of paint to use on a ceramic sink is epoxy paint. This type of paint is more durable and can withstand more wear and tear. It is also more resistant to chipping and fading. Check the Ekopel products, these are ideal for kitchens or bathrooms.
Yes, you will need to use a special type of paint designed specifically for ceramic in order to get the best results. This type of paint can be found at most hardware stores. You should also sand the sink down before painting in order to create a smooth surface for the paint to adhere to.
LICK Paint are an eco friendly supplier of decorating products. The company was founded in 2019 by Lucas London and Sam Bradley – both experienced startup entrepreneurs.
This lifestyle enhancing paint range comes in 12 different colours; 8 unique to LICK and 4 standard colours (black, white, red and grey). Each colour has it’s own special properties which make them different to other paints available on the market.
LICK paints are made from water based acrylic, free of odour and fumes, they are safe for use in living areas as well as kitchens and bathrooms. They adhere to most clean smooth surfaces; painted walls (preferably fresh), wood, metal, glass and most plastics. They provide a matt finish which can be left as is or over-painted with any standard emulsion paint.
Ideal to buy in bulk, these paints come in 600ml tins (14 cans of paint per box). They are available online at LICKpaint.co.uk.
Currently they offer a collection of 68 paint colours and 25 wallpaper designs.
Lick is an online home decor brand with a focus on sustainable, industry-leading community building. Their eco-friendly products include a range of water-based Acrylic paints and wallpaper that are gentle on the environment and safe for use in living areas such as kitchens, bathrooms and dining rooms.
The LICK Paint line is made from recycled materials with no added fumes or odours; they adhere to most clean smooth surfaces such as painted walls (preferably fresh), wood, metal, glass and most plastics.
LICK Paints are also vegan-friendly with no animal derived ingredients or byproducts. Lick Water-Based Acrylic Paints are free of harsh chemicals such as acrylics, alkyds, oil & solvents – meaning it’s safe for you and your family and also more beneficial to the environment.
LICK Paint will be launching a take-back paint scheme later in the year. We’re working closely with local authorities to provide you with an environmentally friendly way of disposing your empty tins.
For now, empty tins can go into your household recycling bin and we’ll recycle them for you.
Is LICK Paint safe for use in bathrooms and kitchens?
Yes, we’ve tested our products extensively to ensure they’re safe for use in living areas such as kitchens and bathrooms. We use a special blend of acrylics & water-based materials to provide the perfect finish.
Lick Wallpaper is made from 100% recycled fibers so not only will your walls look good but they’ll be doing good too!
Where is LICK Paint made?
Lick’s products are proudly ‘Designed in Britain’ and the majority of our manufacturing base is here too. We use high quality UK suppliers where possible so you can be sure that our products meet the highest standards.
This is available for decorators, designers and property pros. We understand that you need to work to your own schedule and meeting deadlines is important. By becoming a LICK Pro member, we’ll provide regular updates of new products and offer exclusive access to our ‘Pro’ range- this will ensure you’re the first to get your hands on exciting new designs before anyone else!
Exclusive trade prices; Discounts already applied.
Easy, instant ordering; 24/7 online ordering
Delivery that works for you ; Direct to site or your office.
Priority account support; Dedicated account manager and WhatsApp.
Why choose paint that is both water-based and low VOC (volatile organic compound)?
There are many benefits to using water-based paint which has a relatively low VOC count compared to other paints on the market. We have carefully designed our products with ease of use in mind, ensuring they are not only long lasting but also safe for you and your family. Apart from being safer, LICK Acrylics are also more beneficial for the environment and take pride of place in any contemporary home.
LICK has developed a range of water-based acrylic paint made from only the finest quality ingredients. They contain no harmful chemicals such as acrylates, alkyds or solvents and are completely odourless. LICK Acrylic paints are suitable for almost all smooth surfaces including wood, metal, glass and most plastics.
They offer a superior service from the initial consultation to the finished job. They have an ever-increasing range of high quality paint colours to choose from as well as contemporary wallpapers which complement their collection perfectly. Their ongoing support for their customers is second to none; they offer ongoing customer service, free samples and would be happy to answer any questions you may have.
LICK Acrylic paints are suitable for almost all smooth surfaces including wood, metal, glass and most plastics, so yes pretty much everything!
The advantages of using LICK’s water-based paint are clear but the impact goes much further. By encouraging customers to plan ahead, they’ve helped reduce litter in our streets and by-ways; not only this but recycling their old paint tins helps save energy (less power is required to make new cans) and reduces emissions.
Like many other manufacturers, they have reduced the amount of chemicals in their products to make them friendlier for the environment. With a low VOC count, this is one of the main environmental advantages to using LICK Acrylics. There are also health benefits associated with using our paints, as many VOC’s can cause nausea and headaches. LICK paint is completely odourless and has minimal fumes.
Lick Acrylics have very low odour so they require no ventilation when being used which means you won’t need to worry about opening all your windows or creating a negative pressure in the room.
A damp cloth will clean fresh paint and a dry cloth will remove any spills or marks. You can also use household cleaners when needed which is much better for your walls than using chemical cleaners that weren’t designed to be used with paint.Continue reading